3D Printer Filament WOOD 1.75 / 3.0mm
1 Manner and packing: We use plastic tray, the net weight 1.0KG, we put desiccant in it,
use vacuum package, every Tray into a small box, and the each 8
small box into a master carton.
2 Plastic tray: diameter 160mm, axle hole32mm, overall height 90mm.the
Diameter 200mm, axle hole 56mm, overall height 70mm. the
corresponding carton 43.5×43.5×18cm
1. Specifications are 1.75&3.0.
2. Vacuum packaging, net weight 0.8KG.
3. Wire is made from virgin wood flour a new composite material,
anti-corrosion, resistant to moisture, acid, not moldy
4. Printed products close to wood effect. , Distribution of wood
flavor, like wood, can be nailed, drilled, carved.
5. When the wood fibers in the nozzle and heating, do not wait for a
long time. Otherwise the flour will swell and burn, when you heat a
sufficient temperature and into the wood fibers by hand immediately
print your model.
6. Print temperature 190-230.
Applicable models: Suitable for Markerbot, RepRap,Cubify and UP 3D Printer.
Quality Control :
1, All of Our 3D Printer Filament are 100% virgin material, never use
recycled material or regrind material, and all had achieved the
latest REACH certificate.
2, Before the mass production, our engineer always do the test to
make sure that sure that each batch of new raw materials must be
printed by 3D printer.
3, The Laser diameter runs automatically to control the diameter of
the filament and keeps it in a right range of 1.75 / 3.0mm, and our
engineer will adjust it immediately when it alarms to indicate of
wrong size, and this unqualified filament will be cut off and never
4, We to keep the filaments dry, each roll of filament is packed in a
vacuumed poly bag with a desiccant inside of it.